Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Reactors

Case history: New developments with lower catalyst-to-feed ratios for FCC units

RAS, A.V. Topchiev Institute of Petrochemical Synthesis, Gubkin Russian State University of Oil and Gas: Levinbuk, M.
JSC, Gazpromneft: Maksimov, I.  |  Kuznetsov, S.
Gazprom Neft: Galkin, V. V.  |  Makhiyanov, V.

A study was conducted using a series of FCC catalysts that included reduced rare-earth content and increased zeolite Y quantity systems. The goal was to raise gasoline yield along with greater yields of olefins.

HP Industry Perspectives: Marine fuels: Not clear sailing ahead

Hydrocarbon Processing Staff: Romanow, Stephany

Major changes are unfolding that will impact the marine shipping industry. Within the next decade, tighter environmental rules will be in place, changing fuels used to propel international and domesti..

Investigate power limitations in a large steam turbine

Fluor Canada Ltd.: Ghaisas, N.

An investigation was carried out to rectify power limitations for a steam-turbine driver of a cracked-gas compressor (CGC) in a world-class ethylene plant.DescriptionThe turbine is a nine-stage, impul..

Consider both actual and virtual spare parts inventory

Hydrocarbon Processing Staff: Bloch, Heinz P.

Globally, hydrocarbon processing industry (HPI) facilities operate hundreds of thousands of fluid machinery assets. The various service-specific internal components of these assets are supported by ma..

Consider novel CGC and front-end depropanizer system for olefins production

Lamar University: Xu, Q.  |  Fu, J.  |  Zhao, C.

In the presented case study, an innovative design for an integrated CGC-DeC3 system introduces part of the heavier condensate from the early compression stages directly into the high-pressure (HP) depropanizer.

North American olefin producers riding the shale gas wave

With the prospect of abundant low-cost ethane, several producers have announced intentions to build new ethylene capacity.

High-pressure polyethylene: Reemergence as a specialty chemical or not?

Nexant: Farrell, L.  |  Virosco, J.

The analysis results indicate that, while investment capital for new plants favors LLDPE, plant profitability—which is a function of product slate (revenue) and cost—is, in many cases, higher for LDPE plants.

Evaluate challenges in meeting clean-fuel specifications with heavier crude

Saudi Aramco: Al-Zahrani, S.  |  Bright, E.  |  Roy, S.

At a Saudi Aramco refinery, a revamp was planned for processing a different crude oil blend to meet Euro 5 diesel and gasoline specifications. The refinery, which processes semi-light crude oil, is sc..

Improve coker efficiency with reliable valve automation

Calabrian Corp.: Deters, B.
Emerson Process Management: Wolkart, R.

The case history discusses conditions occurring in delayed coker operations at two refineries in Louisiana, the impacts on valve performance, and a solution that offers extended life, better reliability and other benefits.

Take a quicker approach to staggered blowdown

WorleyParsons: Khan, M. S.

The design of a reliable blowdown system for a large sour gas-processing facility is one of the most important aspects of plant design. Safe design is vital for facility operation. With the developmen..