Reactors
Improve refining of tight oil via enhanced fluid catalytic cracking catalysts
Crude oils from tight formations are relatively light, low in concarbon, and contain different contaminants. They have high naphtha and distillate yields, lower vacuum gasoil (VGO) content and almost ..
Can the downstream achieve growth and sustainability?
The global hydrocarbon processing industry (HPI) is transforming beyond typical technical and management forms. This industry is making progress, and it is achieving more sustainability practices. Suc..
Innovative modeling of heavy crudes provides competitive advantages
The increase in heavy crude production, together with the diversity of heavy crude characteristics and sources, leads to technical challenges in accurately predicting production and refining process performance.
HP Engineering Case Histories: Case 80: Sudden temperature change in a centrifugal compressor
A process upset occurred that caused the gas temperature of a centrifugal compressor to increase from the design condition of Tstart = 300°F to Tinf = 600°F in t = 0.25 hours. Some engineers..
Case history: Modernization of Russia’s refining industry—Part 1
Russian laws governing transportation fuels and crude oil have undergone many changes. These regulatory changes will involve the revamping of Russia’s refining industry. At present, this nation h..
Case history: Optimization of aromatics complex
Borealis Polymers executed an online optimization project at its phenol and aromatics plants in Porvoo. The plantwide application increased the output rate by 9% and greatly improved the stability of operations.
Improve the cracking of ethylene dichloride
The discovery and exploitation of shale gas in North America is providing a boost to the domestic petrochemical industry. In particular, commodity petrochemicals such as polyvinyl chloride (PVC) are e..
Improve thermodynamic equilibrium among light olefins in FCC operations
Worldwide propylene demand is strongly increasing. About 28% of the global propylene supply comes from refinery fluid catalytic cracking (FCC) units. The light olefins have relative selectivity due to..
HP Viewpoint: Ethylene production growth drives new global industry standards
Operators that understand global market drivers and the latest technologies will provide the best solutions to improve their profitability and comply with the latest HSE rules.
Reduce moisture intrusion in pipes, tanks and other equipment
Once water enters the system, even at high temperatures, the insulation system can retain large quantities of water. That can then lead to accelerated heat gain or loss.
- India receives fuel oil cargo in Russian SCF tanker after brief halt 4/26
- Biden administration (U.S.) to release SAF tax credit model 4/26
- Boeing, Wagner advance Australia’s SAF Industry 4/26
- S-Oil expects Q2 refining margins to remain steady then trend upward 4/26
- Vitol to charter supertankers from U.S. to Nigeria's Dangote refinery 4/26
- Refiner Valero beats profit estimates on resilient demand, tight supplies 4/26
