Piping
Is coating required on stainless-steel components?
Stainless steel is a generic term used for a large group of corrosion-resistant alloys containing at least 10.5% chromium (Cr), and possibly containing other alloying elements like nickel (Ni), molybdenum (Mo), manganese (Mn) and nitrogen (N).
Good distributor design for high-velocity feed debottlenecks a crude preflash tower
Bazan Group’s crude unit No. 3—not designed by any of the authors’ companies—was bottlenecked by the preflash tower.
Isentropic effects: Application and simulation
A process safety risk in industry is having unknown problems that are not accounted for.
Improve the reliability of a CO2 compressor in a urea synthesis/granulation plant
The carbon dioxide compressor is one of the key major equipment in a urea production plant that produces fertilizers.
Challenges and pitfalls in brownfield EPC projects
Job requirements and scope are well defined in engineering, procurement and construction (EPC) contracts because they are designed and engineered from scratch.
High-frequency acoustic excitation—Part 2
Failure of a piping section at the outlet of pressure safety valves (PSVs) and control valves—where significant differential pressure exists (particularly in gas processing industries)—is a common problem in industries.
Strategies to minimize piping thermal maintenance system cost without compromising performance
Where process fluid must be maintained within a certain operating temperature window, the piping will likely require the application of a thermal maintenance system.
Double-suction centrifugal compressor in ethylene plant inlet piping design
Centrifugal compressors are designed with different suction nozzle orientations and impeller layouts in casing.
Corrosion: Address damage caused by galvanic corrosion
At petrochemical and refining facilities, it is common for U-clamps over piping runs to become corroded, sometimes to the extent where they are completely thinned out.
High-frequency acoustic excitation—Part 1
Failure of a piping section at the outlet of pressure safety valves (PSVs) and control valves—where significant differential pressure exists (particularly in gas processing industries)—is a common problem in industries.
- Digital Feature: Delivering the next-generation workforce by harnessing AI to propel chemical engineering into the future 10/11
- CB&I awarded contract by Saipem Clough JV for Perdaman project in Western Australia 10/11
- Trader Vitol sells Venezuelan oil to Indian refiners 10/11
- Surge in U.S. ethanol exports offsets thriving production 10/11
- Investigation launched into fatal Texas oil refinery leak 10/11
- Nigeria ends state oil firm's role as Dangote refinery's sole buyer 10/11
