Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Emiroglu, I.

Tüpraş, Izmir, Turkey

Ibrahim Cagri Emiroglu is a Process Superintendent responsible for hydroprocessing units. He has been working at the Izmir refinery since 2006. His scope of work is tracking key performance indicators (KPIs) and optimizing the process conditions of the units. He earned a BS degree in chemical engineering from METU and an MS degree in industrial engineering.

Feed nozzle effects on yields and operation of FCCUs

Tüpraş: Genç, M.  |  Karani, U.  |  Emiroglu, I.  |  Er, I.  |  Sönmez, M.  |  Gül, A.  |  Avcilar, S.
Honeywell UOP: Lall, J.

The first-generation, proprietary feed distributorsa had open-pipe bayonets that were located at the base of the wye section/riser.

Additive solutions to SOx emissions in FCCUs

Tüpraş: Genç, M.  |  Dalgıç, E.  |  Karani, U.  |  Emiroglu, I.  |  Er, I.  |  Gül, A.  |  Avcilar, S.
Johnson Matthey Process Technologies: Ventham, T.

Sulfur oxide additives are typically based on hydrotalcite or magnesium aluminate spinel-type structures. Magnesium alumina is the pickup agent present in the most effective SO<sub>x</sub> additives on the market; therefore, to optimize SO<sub>x</sub> reduction, it is critical to maximize the amount of the critical magnesium component in the fluid catalytic cracking unit (FCCU) in an efficient and cost-effective way.

  • 1
  • ... 1 pages