Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Environment & Safety

Executive Viewpoint: Technology to drive decarbonization of the oil and gas industry

Siemens Energy: Fors, T.

<i>Hydrocarbon Processing</i> (HP) was pleased to speak with Thorbjoern Fors (TF), EVP of Industrial Applications, Siemens Energy, to discuss the decarbonization of the oil and gas industry and the technologies that are helping companies meet their sustainability goals.

Editorial Comment

Hydrocarbon Processing Staff: Nichols, Lee

Over the past several decades, the hydrocarbon processing industry has invested heavily in new processing units to produce low-sulfur and ultra-low-sulfur (ULS) transportation fuels.

Industry Perspectives

Hydrocarbon Processing Staff: Nichols, Lee

In the second half of 2021, Hydrocarbon Processing is hosting two events to showcase the leading technologies and people in the refining, petrochemicals and gas processing/LNG industries: The International Refining and Petrochemical Conference (IRPC) and the HP Awards. A “call for abstracts” has opened for both events.

Alarm management: A pillar of process safety management

QHSE Institute: Moreno, C. G.

The following describes how an adequate implementation of alarm management is a fundamental part in process safety management (PSM).

TOTAL refineries improve overhead systems corrosion and salting with amine-neutralizing technology

SUEZ Water Technologies & Solutions: Pothuaud, A.  |  Cross, C.

Weak organic amines are commonly used in crude unit overhead systems to prevent acidic corrosion from chlorides and other acidic contaminants via a neutralization reaction.

Determining the indeterminate

Fluor Daniel India Pvt. Ltd.: Chaudhuri, D.

Standards such as API, ASME and NFPA are applied widely in the refining industry.

Design considerations when flaring ethylene oxide

Gas Processing Consultant: Suares, D. A. G.

The flaring of gases released from normal process vents and safety valve discharges following an overpressure scenario is widely practiced in refineries, petrochemical and chemical plants.

A solution to the IMO 2020 MARPOL Annex VI requirement

Rigby Refining LLC: Klussmann, B.

On January 1, 2020, a new requirement limiting the sulfur content of marine fuel to a maximum of 0.5 wt% went into effect.

Meeting the Tier 3 challenge with ultra-clean alkylate

Exelus, Inc.: Mukherjee, M.

The U.S. Environmental Protection Agency (EPA) introduced Tier 3 gasoline sulfur standards in 2017, requiring all U.S. gasoline producers to adhere to an annual 10-ppm average sulfur limit.

Leveraging digital technologies to create the smart renewable diesel facility

OSIsoft: Harclerode, C.

Many companies are modifying existing crude refineries or building grassroots renewable diesel facilities to produce drop-in, green renewable diesel from a variety of agriculturally derived triglyceride feedstocks.