Pumps
Design a pressure safety valve at the centrifugal pump discharge
In most process plants, it is unusual to install a pressure safety valve (PSV) to centrifugal pump and compressor discharge, but some PSVs are needed and are installed to protect the system against miscellaneous scenarios that could create overpressure in the system.
Reliability: Transform ODR-OPPM into a worthwhile initiative
ODR, which stands for operator-driven reliability, has recently morphed into a new arrangement of letters: OPPM.
Reliability: Avoid pump shaft failures
We welcome and thrive on questions from reliability engineers and try to answer some as best we can.
Compare pitot tube pumps with high-speed centrifugal pumps for low-flow applications
When seeking a pump for a low-flow, high-head application, there is a temptation to choose a high-speed (HS) integral gear-driven centrifugal pump because of its advantages over multi-stage centrifugal and other types of pumps.
Advances in dry gas seal technology for compressors
Compressor owner-operators now have unprecedented and solidly verifiable options.
HP Innovations
The FM-approved FireChek thermal shutoff valve with resettable memory shape alloy can now be used to automatically shut down a pneumatic control system when a nearby fire occurs, or when the ambient temperature reaches 135°F, 150°F or 165°F.
HP Reliability: Consider high-pressure throttle bushings made from fluoropolymers
In February 2004, I reported on how horizontal multistage pumps could be upgraded with a high-performance plastic produced by DuPont, Vespel CR-6100.
HP Innovations
Ingersoll Rand debuted its TURBO-AIR NX 8000 integrally geared centrifugal compressor at the Turbomachinery & Pump Symposia show in Houston, Texas in September.
Use root cause analysis to examine failure of a cooling water pump
Without a holistic approach and a structured root cause analysis, it is hard to unearth complex and multiple issues, particularly design deficiencies.
HP Innovations
EGC Critical Components has announced its dures brand of materials, a new family of proprietary thermoplastic polymer composites developed specifically for the manufacture of bushings, bearings and wear rings in pumps handling a wide range of liquids, including those that contain solid matter.
- ADNOC deploys heavy-duty inspector robot for hazardous environments 5/21
- Indonesia to roll out ethanol-blended gasoline, B50 biodiesel from July 1 5/21
- Australia plans biofuel mandates to boost its energy security 5/21
- HyOrc commences fabrication for Porto waste-to-methanol plant and advances European project pipeline 5/21
- Chevron introduces next-gen Techron in U.S. Chevron and Texaco gasolines 5/21
- Kremlin sees no risk to fuel supply in Russia amid attacks on refineries 5/21
