Pumps
Advancing export terminal technology: An optimized process for the refrigeration of cryogenic hydrocarbons
Ethane production in North America (NA) has expanded dramatically with the onset of shale production and associated hydraulic fracturing. Ethane concentrations in fractured shale gas are typically 10% or higher vs. a traditional range of 4%–7% in associated gas.
Case histories of amine plant equipment corrosion problems–Part 2
Past corrosion incidents provide insight into the causes of corrosion and the preventive actions required to protect plant equipment and reduce costly plant downtime.
The design and construction of large crude oil storage tanks with double-deck floating roofs
As crude oil prices decline, consumption of petroleum fuels is increasing.
Reliability: Could a company be its own worst enemy?
In a recent conversation with a “pump veteran,” we explored his 33 yr of experience with pump original equipment manufacturers (OEMs) from 1984–1997 and with a widely known non-OEM (1997–2017).
Optimize operating parameters for C3 splitters to accommodate feed changes
In the oil and gas sector, fractionation is a vital part of every plant.
Safety in design during mechanical engineering
After a process engineer has completed preliminary documents such as process flow diagrams, material and energy balance, piping and instrumentation diagrams, equipment data sheets, process control philosophies, identifications of the hazardous nature of raw materials, chemicals, byproducts and final products, process equipment layout drawings (plans and elevations), unit plot plans, etc., these documents are issued to other disciplines to carry out further engineering.
Process safety incidents involving simultaneous operations
Some process safety incidents occur as the result of simultaneous or sequential occurrences of operations or activities that interfere or clash with each other.
Minimize engineering errors with competency and proper engineering review
Industry has seen numerous engineering errors during the commissioning phase of projects.
Troubleshooting the repetitive failure and shaft seizure of a hot oil circulation pump
The Shaybah NGL recovery plant has a single-stage, double-suction between bearings, radial-split design for hot oil circulation.
Troubleshooting vacuum operation of an inter-after condenser unit in an ethylene plant
A system of compressors powered by surface condensing steam turbines is inherent in the operation of a typical ethane cracker unit.
- IRPC extends abstracts deadline following strong industry interest 4/7
- BDI signs contract with Ghent Renewables for the construction of a new biofuel feedstock pre-treatment plant 4/7
- Update: IATA airlines chief warns aviation industry falling behind on net-zero 4/7
- Improved recycling of plastic from packaging waste 4/7
- India not to raise petrol, diesel retail prices despite tax hike 4/7
- China teapot oil refiners improve run rates but demand woes, sanctions weigh 4/7
