Process Optimization
Refining: Despite decline, Group 1 base stocks are here to stay
Given increasingly stringent automotive specifications and the advent of the International Maritime Organization’s 2020 sulfur regulations, the continued decrease in Group I base stocks demand should come as no surprise for anyone in the industry.
Industry Perspectives: The Main Column podcast: Crucial topics shaping the industry
In the February issue of Hydrocarbon Processing, the editors asked our global readership what topics they would like to hear on the publication’s new podcast series: The Main Column.
Processing hydrogen-rich gas in a PSA unit
At Tüpraş’ Kırıkkale refinery, adsorbents in pressure-swing adsorption (PSA) units must be reloaded due to the low hydrogen (H2) recovery and low capacity factor of such units.
Octane enhancement avoiding both high reformer severity and alkylation
An innovative refinery process arrangementa converts butane-rich, light paraffinic streams—preferably containing a high proportion of isobutane—into butylene by dehydrogenation.
Cost-effective naphtha hydrotreating unit revamp to increase high-octane reformate production
India, which is the third-largest economy in the world, is home to nearly 18% of the world’s population (nearly 1.4 B).
Safety: Where foresight replaces hindsight: How AI impacts the future of oil and gas safety
According to the International Association of Oil and Gas Producers (IOGP), there were 31 fatal incidents across the industry in 2018.
Demineralized water system design: Considerations for the petrochemical industry—Part 1
Site utility leads, engineers and other professionals in the hydrocarbon/chemical processing industries (HPI/CPI) are facing a perfect storm of increasing demineralized water demand, end of life of existing demineralized water plant equipment, changing source water quality, corporate directives to diversify water sources, and pressure from regulators and community stakeholders to minimize the volume of waste generated from water treatment.
Variable capacity control technology facilitates efficient operation for reciprocating compressors
Reciprocating compressors are used extensively in refinery and petrochemical operations to keep feedstocks and products moving through miles of piping.
Improving plant operations with control valve simulations
In today’s business climate, where project budgets and schedules are under cost and time pressures (and where installed valve applications must perform reliably under increasingly severe conditions), valve simulations are enabling new capabilities.
Design of very-high-flow coefficient centrifugal compressor stages
Centrifugal compressors are widely used in the oil and gas and petrochemical industries, with more than 15,000 operating in the U.S. alone.
![](/media/nkzcuz2h/hp-june-2024-process-optimization.jpg?width=100)
- Essar launches hydrogen power plant at Stanlow refinery (U.K.) 7/16
- Trelleborg partners with Airbus on hydrogen-powered air travel 7/16
- Neste, Mitsubishi Corporation agree on strategic partnership to develop supply chains for renewable chemicals and plastics 7/16
- Vale, Komatsu and Cummins announce collaboration to develop dual-fuel large trucks, powered by ethanol and diesel 7/16
- Mexico–U.S. energy trade value fell in 2023 on lower fuel prices 7/16
- Belarus' Mozyr oil refinery restoring operations after outage due to storm 7/16
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries