Process Optimization
Executive Viewpoint: How to develop a successful asset management strategy during the coronavirus downturn
The coronavirus (COVID-19) has disrupted all sectors of the oil and gas industry, including asset management.
Advanced cooling tower water treatment—Part 1
Refineries, petrochemical plants and similar facilities rely on a significant number of heat exchangers for process control and product formulation throughout the plant.
Piping and instrument diagrams (P&IDs): Part 2—Causes and management of change
It is difficult to categorize or group the many reasons for routine or late changes to a P&ID. Some causes are listed here.
Intensification of sulfur processing units by oxygen enrichment and process flowsheet optimization
The consistent global trend toward improvements in air quality and tighter regulations on emissions, as well as the International Maritime Organization’s shipping regulations, continue to mitigate sulfur levels—not only in conventional transport fuels (petrol and diesel), but also in jet fuels, fuel oils and other heavier distillates.
Best practices for aromatics extractive distillation in integrated complexes
Integrated refining/aromatics/olefins complexes are an efficient and effective configuration to maximize crude oil feedstock value and optimize the value of the entire product chain.
Maximizing diesel hydrotreater profit by multivariable optimization: A case study
A diesel hydrotreater (DHT) is a critical unit within an oil refinery. A DHT processes the diesel range fractions obtained from different units of the refinery—such as from the crude distillation unit and the delayed coker unit—to adhere to diesel fuel market specifications.
Selecting the right gas analyzer to optimize monitoring of NOx and other emissions
Combustion processes of all types generate emissions of one kind or another.
Flow modeling as a tool for WHRU performance optimization
Greenhouse gas (GHG) emissions have become a growing concern for many industrialized countries over the past few years.
Use CFD modeling to improve burner design and operation
Process heaters are essential pieces of equipment in the refining and petrochemical industry that are used to heat hydrocarbons to a desired temperature.
Rapid crude yield: Merging DHAFE with HTSD
Rapid crude yield (RCY) combines a detailed hydrocarbon analysis of the front end (DHAFE) with high-temperature simulated distillation (HTSD), creating a true boiling point (TBP) curve for a crude oil sample.
- Essar launches hydrogen power plant at Stanlow refinery (U.K.) 7/16
- Trelleborg partners with Airbus on hydrogen-powered air travel 7/16
- Neste, Mitsubishi Corporation agree on strategic partnership to develop supply chains for renewable chemicals and plastics 7/16
- Vale, Komatsu and Cummins announce collaboration to develop dual-fuel large trucks, powered by ethanol and diesel 7/16
- Mexico–U.S. energy trade value fell in 2023 on lower fuel prices 7/16
- Belarus' Mozyr oil refinery restoring operations after outage due to storm 7/16
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries
