Piping
HP Flashback: Operations, processes and safety evolve and advance: Excerpts from the 1930s
The following is a mixture of technical articles, columns and headlines published in the 1930s by <i>The Refiner and Natural Gasoline Manufacturer</i>, the forerunner to <i>Hydrocarbon Processing</i>.
Upkeep down the pipe: Plant shutdowns and water treatment
The maintenance checklist for a plant shutdown can sometimes look intimidating and, in the face of a short timeline, unnerving.
Are hot pipes and equipment surfaces ignition sources in the HPI?
Most international and national standards used in the hydrocarbon processing industry (HPI) for conducting hazardous area classification do not provide any guidance or recommendation for non-electrical equipment, such as hot pipe and equipment surfaces, that can act as ignition sources.
HP Flashback: Advancing processing technologies and refining operations: Excerpts from the 1920s
The following is a mixture of technical articles, columns and headlines published in the 1920s by <i>The Refiner and Natural Gasoline Manufacturer</i>, the forerunner to <i>Hydrocarbon Processing</i>.
Materials management: Data-centric execution to enhance organizational productivity—Part 1
As a veteran of many capital projects once observed, “All projects execute materials management—those that do so without a plan and the appropriate resources just do it very poorly.”
Corrosion under insulation on stainless steel
Corrosion under insulation (CUI) is a severe form of localized external corrosion that occurs on stainless steel (SS) that has been insulated.
External pressure design of large-diameter piping: Optimal analysis approach
Large-diameter piping used in the petrochemical, oil and gas, steel plant and power industries often carry toxic fluids and can pose significant safety hazards.
Analyze pressure loss during FCC standpipe catalyst transfer
The fluid catalytic cracking unit (FCCU) is the primary conversion equipment for modern refineries to obtain clean transportation fuels, along with high-grade petrochemical feedstock.
Is coating required on stainless-steel components?
Stainless steel is a generic term used for a large group of corrosion-resistant alloys containing at least 10.5% chromium (Cr), and possibly containing other alloying elements like nickel (Ni), molybdenum (Mo), manganese (Mn) and nitrogen (N).
Good distributor design for high-velocity feed debottlenecks a crude preflash tower
Bazan Group’s crude unit No. 3—not designed by any of the authors’ companies—was bottlenecked by the preflash tower.
- ITT to acquire SPX Flow for > $4.77 B, expanding leadership in highly engineered components and adjacent flow technologies 12/5
- MOL Group introduces eco-friendly Bag-in-Box packaging for lubricants 12/5
- Russia and India sign deal to build urea plant in Russia 12/5
- U.S. liquid fuels groups announce progress on E15, small refinery exemption reform 12/5
- Million Air and Avfuel bring SAF to Austin, Texas (U.S.) 12/5
- Chinese refiners buy oil from storage, raise output with fresh import quota 12/5
