Equipment
General Atomics’ electrostatic separators selected for S-Oil’s Onsan refinery
General Atomics Electromagnetic Systems received an order for a 16-module electrostatic separator system for installation at the new residue upgrading complex project at S-Oil Corporation’s Onsan refinery in the Republic of Korea.
Gazprom develops logistics scheme to ensure delivery of equipment for Omsk refinery
Equipment intended for the construction of new facilities, part of the full-scale modernization of the Omsk Refinery, is being transported to Omsk in stages.
Metrohm develops ASTM acid number method for petroleum products
A method of determining the acid number in crude oil and petroleum products using thermometric titration has been developed by Metrohm and released by the ASTM.
Baumer invests in new development center on Lake Constance
Sensor specialist Baumer is investing in its future with a new building in Stockach on Lake Constance in Southern Germany.
Hoover Container Solutions, Ferguson Group and CHEP Catalyst & Chemical Containers to merge
Hoover Container Solutions, Ferguson Group and CHEP Catalyst & Chemical Containers, three global providers of container solutions products in the energy, petrochemical and general industrial markets, are merging to form Hoover Ferguson Group.
Innovations
Turning methane into a high-value chemical was achieved by German chemical company Grillo after years of intensive research.
Automation Strategies: Data analytics solutions require valid data
Process plants collect enormous amounts of data, both from the sensors connected to the control system and from other sources, including edge devices in the plant and remote devices in the cloud.
Troubleshoot operation of a steam ejector vacuum system
A crude vacuum unit operating properly generates high gasoil yield vs. low-value vacuum residue.
Innovations
Pepperl+Fuchs’ VisuNet RM Shell 4.0 remote monitor firmware for industrial thin client work stations offers significant enhancements through an optimized touchscreen user interface, advanced security features, Windows Embedded Standard 7 and plug-and-play startup capabilities.
Determine fouling margins in tubular heat exchanger design
Fouling, which is caused mainly by the deposition and accumulation of an undesired layer of solids on a heat transfer surface, is very common in tubular heat exchangers.
- Rompetrol completes DCU project at Petromidia refinery 7/17
- U.S. SAF production forecast to eclipse 50,000 bpd by 2026 7/17
- Pertamina expects Balikpapan's CDU IV to resume later this month 7/17
- Exxon shut Joliet, Illinois, refinery after power outage 7/17
- ExxonMobil introduces Enable™ 1617 performance polyethylene 7/17
- Tribunal rejects TC Energy's $15-B claim for Keystone XL 7/17
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries
