Environment
Impact of opportunity crudes on refinery desalter and wastewater treatment performance—Part 2
Refiners are becoming increasingly dependent on opportunity crudes to stay competitive and support margins in the industry’s present uncertain state.
Tackle safety and environmental challenges for storage tank operators
Recent storage tank and industrial plant explosions around the world bring into focus the importance of engineering and building standards.
Process safety as a profit center?
In today’s economic environment, new capital spending is harder to find than loose change buried under the couch cushions.
Hydrocarbon Processing Awards
<i>Hydrocarbon Processing,</i> the downstream processing sector’s leading technical publication, has announced the winners for its second annual awards.
Coupling maintenance strategies for critical equipment
Unplanned outages due to mechanical failures can cost millions of dollars of lost production time for oil and gas companies.
Corrosion impact of the mixture of butanol-blended gasoline
The role of octane boosters on the corrosivity of petroleum products for gasoline/diesel engines has attracted more attention in the auto fuel market due to the depletion of fossil fuels in the world’s feedstock.
Getting onboard with modernization
While electrical equipment typically has a lengthy lifespan, it is not meant to last, or be relevant, forever.
A game-changing approach to furnace safeguarding
This work is a follow-up article to “Automate furnace controls to improve safety and energy efficiency,” which was published in the June 2014 edition of <i>Hydrocarbon Processing.</i>
Technical considerations for the Heydar Aliyev refinery revamp
The following case study describes the early development phases of SOCAR’s ongoing major revamp project at the Heydar Aliyev Refinery (HAR) in Baku, Azerbaijan, and its interface with the associated Azerikimya (AZK) steam cracking complex near Sumgait. References are made to the related SOCAR polymer project in Sumgayit, as well.
Additive solutions to SOx emissions in FCCUs
Sulfur oxide additives are typically based on hydrotalcite or magnesium aluminate spinel-type structures. Magnesium alumina is the pickup agent present in the most effective SO<sub>x</sub> additives on the market; therefore, to optimize SO<sub>x</sub> reduction, it is critical to maximize the amount of the critical magnesium component in the fluid catalytic cracking unit (FCCU) in an efficient and cost-effective way.
- Technip Energies awarded proprietary equipment contract by CP Chem for low-CO2 cracking furnace technology 7/29
- Slovakia will halt diesel supplies to Ukraine unless oil transit restored, PM says 7/29
- TFG Marine signs agreement with Consort Bunkers for four newbuild methanol carriage bunker tankers 7/29
- India to boost refining capacity to 6.19 MMbpd by 2028 7/29
- Cepsa swings back to profit in 2Q on higher prices, wider refinery margins 7/29
- Libya's NOC denies it is in talks to supply crude oil to Nigeria refinery 7/29
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries
