Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Environment & Safety

HP Automation Safety: Periodic functional testing – Is there a better way?

exida LLC: Goble, W.

Process design engineers work hard to create inherently safe processes. To a great extent, this effort is successful and the general industry safety record continues to get better. Cons..

Strategic business elements of ISO 9001:2000

Mustang Engineers, LP: Shah, G. C.

Along with providing quality management, certification may be a valuable marketing tool for enhancing customer confidence

Safety and environmental management compliance

Apex Safety Consultants: Sawyer, M.

A brief review of common certification programs that can enhance performance

Understand basic engineering codes

John Zink Co. LLC: Cooper, H.

Here’s an overview of the nature, use and limitations of US industrial standards

HP Automation Safety: Using the safety life cycle

exida LLC: Goble, W.

IEC 61511, Functional safety: Safety instrumented systems for the process industry sector, was recently released and is available on the IEC Website (www.iec.ch). This standard is well ..

Effectively guard a complex against a terrorist assault

Citadel, LLC: Ready, V.

Turn your facility assets from soft into hardened targets

Human factors analysis for process safety

Primatech, Inc.: Baybutt, P.
Pennsylvania State University Park: Haight, J.

Apply LOPA-HF to a fired furnace

HP Automation Safety: Beware of trip point negative creep

exida LLC: Marsza, E. M.

I recently rediscovered a curious phenomenon that affects SIS shutdown settings: trip points. This malady is particularly problematic for flow measurements in plants that have gone thro..

Noncapital intensive technologies reduce FCC sulfur content – Part 2

Davison Catalysts: Lesemann, M.  |  Schult, C.

Using novel membrane technology, refiners have new solutions to treat gasoline for sulfur and olefins content

Inherently safer design

Mary Kay O’Connor Process Safety Center, Artie McFerrin Department of Chemical Engineering, Texas A&M University System: Gentile, M.  |  Mannan, M. S.  |  Rogers, W. J.  |  O'Connor, T. M.

Implementation challenges faced by new and existing facilities