Environment & Safety
Corrosion impact of the mixture of butanol-blended gasoline
The role of octane boosters on the corrosivity of petroleum products for gasoline/diesel engines has attracted more attention in the auto fuel market due to the depletion of fossil fuels in the world’s feedstock.
Getting onboard with modernization
While electrical equipment typically has a lengthy lifespan, it is not meant to last, or be relevant, forever.
A game-changing approach to furnace safeguarding
This work is a follow-up article to “Automate furnace controls to improve safety and energy efficiency,” which was published in the June 2014 edition of <i>Hydrocarbon Processing.</i>
Technical considerations for the Heydar Aliyev refinery revamp
The following case study describes the early development phases of SOCAR’s ongoing major revamp project at the Heydar Aliyev Refinery (HAR) in Baku, Azerbaijan, and its interface with the associated Azerikimya (AZK) steam cracking complex near Sumgait. References are made to the related SOCAR polymer project in Sumgayit, as well.
Additive solutions to SOx emissions in FCCUs
Sulfur oxide additives are typically based on hydrotalcite or magnesium aluminate spinel-type structures. Magnesium alumina is the pickup agent present in the most effective SO<sub>x</sub> additives on the market; therefore, to optimize SO<sub>x</sub> reduction, it is critical to maximize the amount of the critical magnesium component in the fluid catalytic cracking unit (FCCU) in an efficient and cost-effective way.
Business Trends: A strategic energy solution
Refining is the process of separating crude oil into different hydrocarbon groups through distillation.
Industry Perspectives: The latest advancements in refining/petrochemical technologies on display
From September 25–26, Hydrocarbon Processing will bring its International Refining and Petrochemical Conference (IRPC) back to the US.
Engineering Case Histories: Case 102—Use caution when specifying a safe hydrotesting distance
Hydrotesting is performed on piping and vessels to verify their integrity.
Editorial Comment: Celebrating the latest advancements in HPI technology
At the end of this month, <i>Hydrocarbon Processing</i> will honor the latest technological advances in the hydrocarbon processing industry (HPI) at an awards gala.
Options for meeting wastewater effluent selenium limits
Wastewater treatment units (WWTUs) in petroleum refineries are designed to meet effluent limitations incorporated into National Pollutant Discharge Elimination System (NPDES) permits for “conventional pollutants.”
- ExxonMobil plans 1 Blbs/yr of advanced recycling by 2027 11/22
- Gauging the likely Trump effect on U.S. energy and power sectors 11/22
- Russia's Lukoil restoring cracker at NORSI refinery, gasoline output rising 11/22
- Nigeria's local currency crude sales fall short of target, Dangote refinery says 11/22
- U.S. October gasoline imports hit post-pandemic low on slump in European shipments 11/22
- Clean Hydrogen Works awards McDermott FEED contract for Ascension Clean Energy (ACE) project 11/21
