Process Optimization
Review of the CSB report on the 2010 Tesoro refinery fire
On April 2, 2010, a catastrophic fire occurred within the naphtha hydrotreating unit in the Tesoro refinery in Anacortes, Washington. The final CSB report, including recommendations, was issued in May 2014, more than four years after the incident that resulted in the tragic loss of seven lives. This work critically reviews the CSB analysis of this incident and several of its resulting recommendations.
Utilize genetic programming to develop new point efficiency correlation
Distillation is one of the most used separation operations in the chemical and petroleum industries.
Distillation—Then and now
Distillation is the most often used means to separate two or more components, exploiting the physical properties of different boiling points.
Choose the most appropriate modeling approach for reactors
The efficient operation and design of any reactor depends on the know-how regarding the chemical reaction and the hydrodynamics inside the reactor.
Analyze abnormal operations of an HDS reactor loop with dynamic simulation
Hydrodesulfurization units are used in a petroleum refinery to process a variety of feeds to alter composition via the addition of hydrogen.
Utilize an optimizer to blend gasoline directly to ships
A new control system and single-blend optimization system make it possible to blend gasoline directly into tanker ships for delivery, rather than only into tanks, thereby saving millions in capital and reducing product giveaway.
Syngas from H2S and CO2: An alternative, pioneering synthesis route?
Hydrogen sulfide and carbon dioxide represent major concerns for the hydrocarbon industry. Both species are contaminants and, since their use as feedstock is minor, are considered troubling byproducts.
Secure the best benefits from C4 hydrocarbon processing—Part 1: Separation sequences
Crude C<sub>4</sub> streams from the steam cracker unit or the fluidized catalytic cracker unit contain valuable hydrocarbons, such as butadiene and C<sub>4</sub> olefins.
Mitsubishi Plastics selects Jacobs as engineer on US plant expansion
Under the terms of the agreement, Jacobs is providing engineering services for the $100 million investment, which includes installation of a polyester film production line.
Engineering unit of China’s CNPC to build first refinery in Cambodia
Northeast Refining and Chemical Engineering Co.(CNPCNE) is scheduled to complete building the first phase of the project of 2 MMtpy, or about 40,000 bpd by 2018, Xinhua said.
- Rompetrol completes DCU project at Petromidia refinery 7/17
- U.S. SAF production forecast to eclipse 50,000 bpd by 2026 7/17
- Pertamina expects Balikpapan's CDU IV to resume later this month 7/17
- Exxon shut Joliet, Illinois, refinery after power outage 7/17
- ExxonMobil introduces Enable™ 1617 performance polyethylene 7/17
- Tribunal rejects TC Energy's $15-B claim for Keystone XL 7/17
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries
