Petrochemicals
Editorial Comment: Petrochemicals: Changing technologies and configurations to satisfy future demand
For nearly a decade, capital investments in new petrochemical capacity have skyrocketed. This
Down with downtime: Repair complex petrochemical components with selective electroplating
The volatile impact of the coronavirus pandemic hit at the same time the petrochemical industry was entering a downcycle.
Strategies to minimize piping thermal maintenance system cost without compromising performance
Where process fluid must be maintained within a certain operating temperature window, the piping will likely require the application of a thermal maintenance system.
Double-suction centrifugal compressor in ethylene plant inlet piping design
Centrifugal compressors are designed with different suction nozzle orientations and impeller layouts in casing.
Optimizing failure data analysis
A critical objective of engineers who design an automatic protection system is to lower the false trip rate and to lower a key metric called average probability of failure on demand (PFDavg).
Getting the most out of your process burner tiles
It is often incorrectly assumed that the burner tile is simply a piece of refractory or firebrick. Nothing could be further from the truth.
A novel polymerization retarder with boosted performance and improved handling characteristics
Styrene monomer production plants continually face a need to slow polymerization rates in the purification section of the production process to increase monomer production rates, reduce polymerization/fouling and tar formation, and protect against equipment plugging, especially in the event of unplanned shutdowns.
Best practices for pygas-based styrene extraction
Pyrolysis gasoline (pygas) is a by-produced fraction of hydrocarbons generated from a steam cracker.
How high can polyethylene and polypropylene plant capacities rise?
Polyethylene (PE) and polypropylene (PP) plants are the popular downstream derivatives of ethylene crackers or petrochemical fluidized catalytic cracking (petro-FCC).
Fuels and chemicals: Finding the right refinery configuration for a less predictable world
The refining industry links the upstream production of crude oil with the end markets for fuel products, as well as for the petrochemical/chemical industry.
- Rompetrol completes DCU project at Petromidia refinery 7/17
- U.S. SAF production forecast to eclipse 50,000 bpd by 2026 7/17
- Pertamina expects Balikpapan's CDU IV to resume later this month 7/17
- Exxon shut Joliet, Illinois, refinery after power outage 7/17
- ExxonMobil introduces Enable™ 1617 performance polyethylene 7/17
- Tribunal rejects TC Energy's $15-B claim for Keystone XL 7/17
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries
