Maintenance & Reliability
HP Innovations
Corrosion prevention for high-TAN refiningFor petroleum refiners, improving profitability by processing high-total-acid-number (high-TAN) crude oils requires an investment in high-temperature corrosio..
HP Reliability: Does Pareto’s 80/20 rule apply to reliability engineers?
In the 1970s, an oil refinery discovered that 7% of its 3,200 process pumps experienced a disproportionate share of the facility’s yearly pump outage events. Slightly over 60% of the money spent ..
Sulzer acquires weld overlay company Interweld
The integration will start after closing, which is expected in the beginning of 2015. All employees will be retained, ensuring ongoing customer dedication in the weld overlay marketplace.
Optimize amine sweetening with an optical O2 analyzer
After extraction, raw natural gas must go through processing before it is suitable for industrial, commercial and residential usage. The first stage of gas processing is known as “sweetening,..
Fine-tune monitoring of critical compressors
In this case history, a new monitoring system was installed on a critical service hyper compressor for a Middle East (ME) ethylene complex. This unit supported two 400 Mton polyethylene (PE) units; do..
Consider technology to reduce compressor vibration and noise problems
Industrial centrifugal compressors installed in hydrocarbon processing industry (HPI) complexes absorb significant amounts of mechanical power when compressing gases. A small part of the mechanical en..
Achieve successful compressor startup by addressing dry-gas seal failure
A common root cause for compressor failure during first startup is a failure of the dry-gas seal (DGS) system. To avoid failures of gas compressors, the project team and end users must understand the importance and significance of the DGS very early in the basic design phase.
Without reliability, there can be no safety
Reliability and safety are complimentary concepts. For instance, unless process reliability at a plant is extraordinary, safety cannot be assured. Achieving the highest level of safety at a processing..
HP Reliability: Plan now to deal with stressed equipment later
The US Energy Information Administration’s (EIA’s) “Today in Energy” brief evaluated how US refineries are processing record amounts of crude oil (Fig. 1), with Midwest and Gulf Co..
HP Innovations
Conductivity meter resolves SDA dosingA major Asian refinery approached Stanhope-Seta and D-2 Technologies to assess its options for automatic dosing of static dissipater additive (SDA) in the jet fue..
- U.S. SAF production forecast to eclipse 50,000 bpd by 2026 7/17
- Pertamina expects Balikpapan's CDU IV to resume later this month 7/17
- Exxon shut Joliet, Illinois, refinery after power outage 7/17
- ExxonMobil introduces Enable™ 1617 performance polyethylene 7/17
- Tribunal rejects TC Energy's $15-B claim for Keystone XL 7/17
- U.S. imports of Canadian crude hits record high following TMX startup 7/17
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries
