Maintenance & Reliability
Digital Technologies: Do not just monitor bad actor machines: Start when they are healthy
Often, facilities hesitate to invest in monitoring rotating equipment until the machine fails. By that time, there is no background information, such as vibration or temperature data, to help site engineers diagnose the machine’s failure. However, by implementing a remote monitoring solution on healthy equipment, users can set a baseline of machine health to gain essential insights when the machine begins to fail.
Steam-surface condensers: Lessons from the field
Steam-surface condensers are used throughout the refining, petrochemical and chemical industries.
Emerson wins contract to automate $8.5-B Golden Triangle Polymers facility
Emerson will provide automation technologies, software and analytics from its Plantweb™ digital ecosystem for the Golden Triangle Polymers Project, a world-scale integrated polymers facility on the Texas Gulf Coast.
Executive Viewpoint: Drive the decarbonization of chemical plants through energy efficiency enhancements
Like all process industries, the chemical sector is under intense pressure to drastically reduce its carbon footprint and reach net-zero emissions by 2050.
Innovations
Globally, > 90 MMbpd of crude oil, natural gas and refined hydrocarbons are produced, transported, stored and sold to end users.
Motiva shuts coker at Port Arthur refinery (U.S.) for repairs
Motiva Enterprises shut down its coker at the 626,000-bpd Port Arthur, Texas, refinery to repair piping.
U.S. crude oil inventories rose as utilization drops
U.S. crude oil inventories rose for the ninth week in a row, surging to their most since May 2021, as refiners ran less oil during a strong maintenance season.
ExxonMobil is planning to startup new CDU at its Beaumont refinery
ExxonMobil is planning to start the new crude distillation unit (CDU) at its 369,024-bpd Beaumont, Texas (U.S.), refinery this weekend.
Atlas Copco announces CO2 Learn & Lunch
Registration is open for the CO2 Lunch & Learn event being held by Atlas Copco Gas and Process at the Westin Galleria hotel in Houston, Texas. On February 17th 2023, visitors will gain insights into turbocompressor and centrifugal pump solutions for CO2 applications.
Key considerations for the optimum design of a hot oil system
In the hydrocarbon processing industry, where direct heating is not possible, a heat transfer medium is used. Steam has traditionally been the preferred heating medium.
- BASF starts up the world’s first production plant for 3D-printed catalysts in Ludwigshafen 3/19
- Haffner Energy receives rapid bookings for CORE100 clean-fuel production units 3/19
- ABB launches EmissionVision to automate advanced gas leak detection 3/19
- Ebara Elliott Energy partners with NuScale Power for use of advanced nuclear technology to power petrochemical plants 3/19
- bp agrees to sell 12-MMtpy Gelsenkirchen refinery to Klesch Group 3/19
- Sumitomo Corporation, “K” LINE and NYK Line conclude MoU for new build ammonia bunkering vessel operation in Singapore 3/19
