Heat Transfer
HP Flashback: Operations, processes and safety evolve and advance: Excerpts from the 1930s
The following is a mixture of technical articles, columns and headlines published in the 1930s by <i>The Refiner and Natural Gasoline Manufacturer</i>, the forerunner to <i>Hydrocarbon Processing</i>.
Case study: Challenges in the selection of a helical baffled exchanger
In a greenfield project, a proprietary heat exchanger<sup>a</sup> has been found to be preferable to conventional shell-and-tube (S&T) exchangers to optimize the total lifecycle cost (i.e., capital, operating, installation and maintenance costs).
Maximize value and successfully revamp a fired heater
Fired heaters are facing scrutiny because they contribute to the global emissions of carbon dioxide (CO<sub>2</sub>) and nitrogen oxides (NO<sub>x</sub>).
Gas-side fouling effects on transfer-line exchangers
Transfer-line exchangers (TLEs) are specific shell-and-tube heat exchangers installed out of hydrocarbons steam cracking furnaces for olefins production.
Bolting material bolts-up the exchanger design
Shell-and-tube heat exchangers use multiple girth flange joints based on their Tubular Exchangers Manufacturers Association (TEMA) type to assemble shell and tube sides.
HP Flashback: Advancing processing technologies and refining operations: Excerpts from the 1920s
The following is a mixture of technical articles, columns and headlines published in the 1920s by <i>The Refiner and Natural Gasoline Manufacturer</i>, the forerunner to <i>Hydrocarbon Processing</i>.
Impact plant performance by improving the steam system
Petrochemical plants and refineries face production and profitability challenges on multiple fronts.
Process Controls, Instrumentation and Automation: Why it is time to move on from the thermowell
Thermowells are widely used in industrial applications for measuring temperature; however, with new, high-accuracy, non-invasive alternatives available, it is time to move on from thermowells and embrace more innovative measurement techniques.
Advanced methods for controlling boiler tube corrosion and fouling—Part 2
In Part 1 of this article, the authors covered techniques for minimizing corrosion and contaminant ingress from condensate return and feedwater to industrial steam generators.
H2O2 and its hydrocarbon nitridation/oxidation to produce caprolactam and propene oxide
Traditional hydrocarbon nitridation and oxidation technologies, such as caprolactam (CPL) and propene oxide production technologies, present low atom utilization and serious environmental pollution problems.
![](/media/nkzcuz2h/hp-june-2024-process-optimization.jpg?width=100)
- Neste, Mitsubishi Corporation agree on strategic partnership to develop supply chains for renewable chemicals and plastics 7/16
- Tecnimont awarded green ammonia plant study in India 7/15
- Audi, bp team up with strategic sustainable fuels partnership for Formula 1 7/15
- Iowa biodiesel industry commends Rep. Hinson on letter to EPA 7/15
- Singapore's 1H 2024 bunker sales rise on year but June sees a monthly decline 7/15
- Russia may reinstate gasoline export ban from August if shortages worsen 7/15
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries