Engineering & Design
Bringing Industry 4.0 to the terminal
The oil and gas industry is no stranger to the power of Industry 4.0 solutions that aggregate sensor and planning/forecasting data into a single shared view, as well as deliver valuable analytics and real-time alerting capabilities.
Process design consideration for a deep-cut vacuum distillation unit—Part 1
In the recent past, many US refineries have been reconfigured to process heavy opportunistic sour crudes.
Revamp results for CCR catalytic reforming unit with atmospheric regenerator
The reformate market is changing.
New cable sealing system offers cost and maintenance savings for processing plants
Miles of cables of various diameters are routed into new process plants, industrial plants, petrochemical plants, refineries and other industrial applications.
Advanced process control metrics: Closing the loop on APC performance
For more than 30 yr, advanced process control (APC) has established itself as an important and relatively routine and valued part of the industrial process control and operation landscape.
Dynamic simulation for FGRS design and controllability analysis
In this study, a dynamic model of a flare gas recovery system (FGRS) with a high-pressure eductor compression system was developed in a dynamic simulation for process design verification, control scheme evaluation and an availability study.
Improve refinery production and efficiency with asset monitoring
The sheer volume of equipment in a refinery—from vessels, columns, huge structures and mazes of pipes to pumps, valves, controllers and instruments—is staggering.
Onsite
Jenny Hebert and George Yaluris of Albemarle accept the <i>HP</i> Award for Best Catalyst Technology.
Engineering Case Histories: Case 103—Addressing heat exchanger tube leaks
Heat exchangers have multiple tubes with fluid passing through and over them that either heats or cools another fluid.
More residue processing in FCCUs
Resid units have more than 2 wt% Conradson carbon residue (Concarbon) in feed and more than 5,000 parts per million (ppm) of nickel (Ni) and vanadium (V) on equilibrium catalysts (Ecat).
- Dow, Ambipar partner to promote plastics recycling in South America 11/26
- Hygenco selects Topsoe as technology provider for green ammonia production 11/26
- Aviation sector officials warn of Trump effect on green jet fuels 11/26
- Russia's oil and gas revenue down by a third in November m/m 11/26
- Contentious COP29 deal shows climate cooperation fraying at edges 11/26
- Oil majors betting big on biofuels with more than 40 projects by 2030 11/26
