Crude oil
Corrosion: Maintaining profitability with opportunity crudes while mitigating naphthenic acid corrosion
Refiners are asked to produce products within ever tighter margins in a changing industry.
Process Controls, Instrumentation and Automation: Improved methods for trace element analysis of challenging petrochemical samples
There is no doubt that the purpose of refining crude oils into natural raw materials is crucial to produce a vast array of fuels and products used in our daily lives.
Stack gas scrubbing to meet IMO’s 0.5% sulfur bunkering requirement
The International Maritime Organization implemented the IMO 2020 regulations on January 1, 2020.
Design and scale-up of gaseous Group A fluid bed systems for chemical synthesis
More than 100 fluid bed reactors for chemical synthesis and comparable processes using Group A powders have been installed and operated successfully since the late 1940s, with some reactors having an inside diameter at much larger than 7 m (23 ft).
Impact of inaccurate water-in-oil measurement
Water-in-oil content is an important parameter for both the upstream and downstream sectors of the oil and gas industry.
Improve kerosene mercaptan sweetening with fluoropolymer-cartridge liquid-liquid coalescers
Many refineries are experiencing new problems related to the formation of stable emulsions and poor separation due to the increased use of lower-cost opportunity crude oils that have a high total acid number (TAN), higher gravities and more sulfur content.
Asphaltene removal technology produces novel cement waterproofing additive
Addressing climate change and environmental issues has become a top priority in the 21st century.
Implementation of advanced level control techniques in refinery operations
Plant performance depends on stable operations, with steady feed, product flow, temperature and pressure control as per process requirements.
Management of LPG pool in a complex refinery
LPG pool management is becoming more important as the regulations on the product specifications tighten.
Oil refinery/petrochemical integration in a CO2-constrained world—Part 2
Petrochemical demand will increase with gross domestic product, while the demand for motor fuels will only show modest growth and may even decline in certain regions, given environmental/legislative pressures and the introduction of battery-powered electric vehicles.
![](/media/nkzcuz2h/hp-june-2024-process-optimization.jpg?width=100)
- Rompetrol completes DCU project at Petromidia refinery 7/17
- U.S. SAF production forecast to eclipse 50,000 bpd by 2026 7/17
- Pertamina expects Balikpapan's CDU IV to resume later this month 7/17
- Exxon shut Joliet, Illinois, refinery after power outage 7/17
- ExxonMobil introduces Enable™ 1617 performance polyethylene 7/17
- Tribunal rejects TC Energy's $15-B claim for Keystone XL 7/17
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries