Compressors
Case history: Failure analysis of a syngas compressor
A first-stage impeller in a synthetic gas compressor failed after 20 years of service. The compressor is a six-stage centrifugal compressor driven by a steam turbine. This case history discusses the i..
HP Reliability: Four-stage, low-flow process centrifugal compressor can fill important industry gaps
In the 1970s and 1980s, multistage centrifugal compressors in the 3,000 acfm (about 5,000m3/hr) and lower flow ranges were largely confined to instrument and plant air duties. Three stages with interc..
HP Engineering Case Histories: Case 74: How to determine impact forces when troubleshooting
When troubleshooting failures, it is not unusual for the metallurgical report to indicate that the failure was the result of an impact type of force. The investigator who receives this information mus..
Chevron expands North American compressor oils
Chevron said that Cetus PAO and the rebranded Cetus HiPerSYN (formerly HiPerSYN) have joined Cetus DE to create a family of premium compressor oils formulated for use in a wide range of applications, including portable and stationary rotary screw, rotary vane, and reciprocating compressors.
HP Reliability: Expect adversity, but plan for success
Consider that a major oil refinery was planning a substantial modernization project in 2008. Energy efficiency gains and the ability to process a more readily available crude slate were key motivating..
HP Engineering Case Histories: Case 73: Useful troubleshooting tools to keep at hand
Over the past 45 years, the author has pursued troubleshooting machinery and pressure vessels. It has also been the subject of this column. The troubleshooting tools used in this endeavor have been an..
HP Innovations
Training simulator to aid ethylene operatorsHyperion Systems Engineering has delivered to the Linde Group an operator training simulator (OTS) for ONGC Petro-additions Ltd.’s ethylene plant in Da..
HP Reliability: Gain more flexibility with special liners for reciprocating compressor cylinders
By changing only the crank-end head, piston and rod assembly, the same cylinder body can be mounted on any of the common 5-in. to 7-in. stroke compressor frames that have been manufactured in the last five decades.
Rerating rotating equipment optimizes olefins plant performance
Rerating your installed compressors and steam turbines can become a cost-effective, time-saving solution for increasing throughput without having to invest in new equipment.
Investigate power limitations in a large steam turbine
An investigation was carried out to rectify power limitations for a steam-turbine driver of a cracked-gas compressor (CGC) in a world-class ethylene plant.DescriptionThe turbine is a nine-stage, impul..
- Essar launches hydrogen power plant at Stanlow refinery (U.K.) 7/16
- Trelleborg partners with Airbus on hydrogen-powered air travel 7/16
- Neste, Mitsubishi Corporation agree on strategic partnership to develop supply chains for renewable chemicals and plastics 7/16
- Vale, Komatsu and Cummins announce collaboration to develop dual-fuel large trucks, powered by ethanol and diesel 7/16
- Mexico–U.S. energy trade value fell in 2023 on lower fuel prices 7/16
- Belarus' Mozyr oil refinery restoring operations after outage due to storm 7/16
- Digital Exclusive: SPECIAL FOCUS: Digital Technologies—Utilize process simulation digital twin to optimize condensate yield
- Digital Exclusive-Flare system design: Liquid pockets in flare headers
- Hydrogen-rich content gasoline: A new concept for paraffinic gasoline reformulation
- Alarm rationalization at Kuwait National Petroleum Company (KNPC) refineries