Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Asia/Pacific

How to select the ‘best’ fired heater for your operations

Linde Engineering North America, Inc.: Shahani, G.  |  Remster, J.  |  Ma, D.  |  Hashmi, O.

With the fluctuation of natural gas pricing, it is important to evaluate technically feasible solutions and choose the most economical alternative. Ultimately, this leads to a simpler and more cost-effective solution.

Successfully design fired heaters using ultra-low-NOx burners

Bechtel Corp.: Ahamad, S.  |  Vallavanatt, R.

Recent environmental regulations mandate that refinery and petrochemical industries reduce nitrogen oxide (NOx) emissions. Emissions legislations are constantly under review, and they differ from coun..

Can process automation increase energy efficiency?

Energy efficiency doesn’t imply producing less to reduce energy consumptions, but rather improving plant productivity and effectiveness, allowing plants to produce the same amount of product with fewer resources.

Tune up the ‘sweetening’ process for your facility

CSIR-Indian Institute of Petroleum: Garg, M. O.  |  Kumar, S.  |  Ganguly, S. K.  |  Das, G.  |  Sain, B.

Novel catalysts can improve the oxidation of thiols (RSH) found in light oils. Thiols in petroleum products, such as liquefied petroleum gas (LPG) and light straight-run naphtha (LSRN), usually found ..

Optimize crude preheat train to balance efficiency and operability

Foster Wheeler: Zhang, J.

Critical attention must be paid when designing the crude distillation unit (CDU) preheat train. Many pitfalls can easily lead to unnecessary expenditures or unsatisfactory operations. Key design crite..

Are you using pinch technology effectively in your daily operations?—Part 1

KBC Process Technology Ltd.: Milosevic, Z.  |  Rudman, A.  |  Brown, R.

Pinch technology is the most rigorous, systematic and best documented methodology for process design.1–3 Nearly all optimization projects for heat recovery are conducted with some form of pinch a..

HP Reliability: Gain more flexibility with special liners for reciprocating compressor cylinders

Hydrocarbon Processing Staff: Bloch, Heinz P.

By changing only the crank-end head, piston and rod assembly, the same cylinder body can be mounted on any of the common 5-in. to 7-in. stroke compressor frames that have been manufactured in the last five decades.

HP Boxscore Construction Analysis: India’s refining capacity expands to satisfy surging demand

Hydrocarbon Processing Staff: Nichols, Lee

Both public and private refiners are planning or have already commenced major expansion and upgrade projects, with several working to develop new grassroots facilities.

HP Viewpoint: Brief overview of India’s upstream

Cairn India Ltd.: Nair, S.V.

Over the last few decades, the Indian upstream sector has evolved through three different regulatory regimes—nomination, pre-new exploration licensing policy (NELP)/limited bid rounds and, finall..

HP Automation Safety: Maintenance capability: Does it matter in the long term?

exida LLC: Goble, W.

I remember working in a test department, where a particular technician, known as Mike, seemed to destroy a significant percentage of the equipment he worked on. Since he reported to me, I tried extra ..