Maintenance & Reliability
Terra Drone Corporation & NDT CCS performs visual inspection of Adnoc Refining's RFCC facilities
The pilot project this time was carried out to prove that drones can be used for internal visual inspections at RFCC facilities, especially in reactors, cyclones, and boilers.
Viewpoint: The pathway towards autonomy: How process automation is building the future plant
<i>Hydrocarbon Processing </i> sat down with Jason Urso (JU), Chief Technology Officer, Honeywell Process Solutions, to discuss the current state of the process automation industry, how new technologies are enhancing efficiency and safety, and what the future holds for automation.
Pressure swing adsorption vessels fatigue analysis
The hydrogen (H<sub>2</sub>) plant in a refinery produces high-purity (99.9+ vol%) H<sub>2</sub> products using a licensed pressure swing adsorption (PSA) purification process to fulfill the H<sub>2</sub> makeup needs of refinery hydroprocessing facilities.
Creating opportunities for future fluid machinery experts
The state of understanding science and facts on one side and distinguishing these from anecdotes and often far-fetched opinions on the other side should be concerning to us. Institutions of higher learning can be disinclined to teach needed, applicable or actionable knowledge.
Choosing the proper regulator configuration can reduce droop
Many factors go into selecting the proper regulator for your system. One of those factors is sensitivity to changes in outlet pressure as downstream flow fluctuates, which is often characterized as “droop” as illustrated within a regulator’s flow curve.
Developing and utilizing a novel, toughened epoxy adhesive
When identifying solutions that can offer assurance and longevity, the maintenance and reliability of asset repairs can be challenging.
Storage tank settlement and soil-side corrosion assessment with optimized repair strategy
Aboveground storage tanks are used in several industries with different fluid services. These
HRSG water/steam sampling: Do it right or face potential consequences
Many large industrial facilities—including refineries, and chemical and petrochemical plants—are increasingly turning to co-generation for process steam and power production.
Valves, Pumps and Turbomachinery: Achieving the right installation torque with a virtual calculation
Determining the required installation torque for a tight flange system is a daily challenge for industrial valve manufacturers and plant operators.
Reliability: When to consider liquid-ring compressors
Liquid-ring compressors (FIG. 1) use the centrifugal whirling of a sealing liquid to create a series of piston-like water columns to trap gas or vapor between the impeller cells of a rotor installed eccentric to its casing.
- Renewable fuels project in Canada begins production 4/19
- Jet fuel demand growth lags as air traffic exceeds pre-pandemic level 4/19
- Jet2.com to use SAF at London Stansted Airport 4/19
- Neste and New Jersey Natural Gas target reducing greenhouse gas emissions with Neste MY Renewable Diesel 4/19
- Cepsa and Evos join up for green methanol storage in Spain and the Netherlands 4/19
- Russia's Bashneft oil company installs anti-drone nets to protect refineries 4/19