Panchal, A.
Anilkumar Panchal is a Mechanical Design Engineer with the Technical Services Group at Kuwait Integrated Petroleum Industries Company (KIPIC). When this article was written, he was employed with Reliance Industries Ltd. Mr. Panchal has worked on butyl rubber, gasification, ethane cracker, chlorinated PVC and refinery revamp projects. He is a certified chartered engineer and professional engineer in India, and has prior work experience at L&T Heavy Engineering, Bechtel India, Jacobs Engineering and Reliance Industries. Mr. Panchal holds a Bch degree in mechanical engineering from Lalbhai Dalpatbhai College of Engineering (LDCE) in Ahmedabad, India, and a master’s degree in industrial process equipment design from Sardar Vallabhbhai National Institute of Technology (SVNIT) in Surat, India.
Fabrication of clad equipment and piping—Part 2
For pressure vessels, heat exchangers and piping in corrosive services, the materials in contact with the process are often required to be high alloys to provide a reliable service life.
Fabrication of clad equipment and piping—Part 1
For pressure vessels, heat exchangers and piping in corrosive services, the materials in contact with the process are often required to be high alloys to provide a reliable service life.
- 1
- ... 1 pages
- Russia's Ryazan oil refinery restores crude processing to 60% of pre-attack level 3/28
- Global refinery capacity totaling 3.6 MM bpd at high-risk of closure 3/28
- More than 20% of global oil refining capacity at risk, analysis finds 3/28
- SABIC Fujian Petrochemicals advances major ethylene project with Lummus technologies and services 3/28
- Singapore fuel oil stockpiles slip to two-week low 3/28
- Sri Lanka minister says Sinopec to start work on refinery by June 3/28