Safety
Improve the cracking of ethylene dichloride
The discovery and exploitation of shale gas in North America is providing a boost to the domestic petrochemical industry. In particular, commodity petrochemicals such as polyvinyl chloride (PVC) are e..
HP Reliability: Small deviations can compromise equipment reliability
In 2013, a major refinery was experiencing serious pump problems. The refinery had a massive thrust-bearing failure on a critical 3,560-rpm pump. The pump was designed and manufactured by a well-known..
HP News
 Irving Oil refinery begins $60-million turnaroundA major turnaround is underway at Irving Oil’s refinery in Saint John, Canada. It began in early March and is expected to last until mid-Ap..
HP Innovations
Modular generator creates precision gas mixturesKIN-TEK’s FlexStream Modular Gas Standards Generating System (Fig. 1) creates precise gas mixtures. The FlexStream system dilutes emissions from pe..
Achieve excellence and sustainability in your next turnaround
To consistently achieve pacesetter results on plant shutdowns and turnarounds, it is imperative that companies have a systematic turnaround management process (TMP).
Continuous corrosion monitoring enhances operational decisions
Operators with permanently-installed continuous corrosion monitoring systems have better understanding of the corrosion and erosion rates occurring within their facility.
Reduce moisture intrusion in pipes, tanks and other equipment
Once water enters the system, even at high temperatures, the insulation system can retain large quantities of water. That can then lead to accelerated heat gain or loss.
Consider new steam system corrosion protection for refineries
New technology in volatile filming corrosion inhibitors and lower-salting neutralizing amines can provide cost-effective solutions for the steam-condensate system and minimize the risk of amine chloride salt formation.
Consider automation to check shell-and-tube heat exchanger design
This automated checklist tool can be used to quickly check the acceptability of your design configuration based on the various project, client and services requirements.
Address inlet pressure loss concerns with restricted lift relief devices
For the past 30 years, standard-sized relief devices have been sized such that it is difficult to meet the installation criteria in American Petroleum Institute (API) standard (STD) 520. This problem ..
- Indian state refiners may buy Middle East spot oil to replace Russian shortfall 12/26
- Stellantis unit to pay $4.2 MM to resolve California (U.S.) emissions probe 12/26
- Japan's Taiyo Oil to shut two CDUs at Shikoku refinery for maintenance 12/26
- Indian Oil to invest $7 B in naphtha cracker project 12/26
- Mexico's oil and gas output drops to lowest level all year in November 12/26
- John Cockerill, Johnson Matthey and ETFuels partner for 120,000-tpy Texas (U.S.) e-methanol project 12/24
